 |  |  |  |  |  |
| "At Aqua Pure we solve water problems with innovative products and solutions. You can count on our water treatment equipment to do what it's supposed to do. Clean your water." |
| H100 Brochure Series water treatment system conditions water effectively and adjusts to your family’s changing water usage patterns. |
| ProMate1 Brochure Powerful, reliable, user-friendly electronics allows fully adjustable regeneration cycles times. |
| ProMate 6 Brochure Salt recycling features SAVES you over 20% in salt usage. |
| AQUA PURE WATER SOLUTIONS 416 GATEWAY DRIVE GRAND FORKS, ND 58203 800-561-5221 OR 701-772-5221 |
| Promate 6 DMT Brochure Condition your water and remove chlorine in a single system! |
HOW A WATER SOFTENER WORKS
The performance of a water softener is dependent on two key components; a
resin bed that cleans the water and precision equipment that cleans the resin.
The two most significant elements that differentiate one softener from another is
the volume of resin and the type of control valve.
The resin tank: contains media called resin. The resin attracts and collects
minerals from hard water. Once the resin is saturated with hardness minerals it
must be cleaned and regenerated. Once regenerated, the resin is ready to
remove more minerals from the water.
The control valve: routes the water flow through the system and controls the
operating cycle. Hard water passes through the resin bed to become soft. During
regeneration, water flow is reversed to clean the resin bed. Brine is pulled in and
then rinsed out to regenerate the resin, preparing it to soften more water. The
brine tank is then refilled with fresh water for future cycles.
The brine tank: stores salt and water to make brine which is used for regenerating
the resin. Resin can be regenerated with sodium from salt or potassium from
potassium chloride.
The performance of a water softener is dependent on two key components; a
resin bed that cleans the water and precision equipment that cleans the resin.
The two most significant elements that differentiate one softener from another is
the volume of resin and the type of control valve.
The resin tank: contains media called resin. The resin attracts and collects
minerals from hard water. Once the resin is saturated with hardness minerals it
must be cleaned and regenerated. Once regenerated, the resin is ready to
remove more minerals from the water.
The control valve: routes the water flow through the system and controls the
operating cycle. Hard water passes through the resin bed to become soft. During
regeneration, water flow is reversed to clean the resin bed. Brine is pulled in and
then rinsed out to regenerate the resin, preparing it to soften more water. The
brine tank is then refilled with fresh water for future cycles.
The brine tank: stores salt and water to make brine which is used for regenerating
the resin. Resin can be regenerated with sodium from salt or potassium from
potassium chloride.
| NOW DELIVERING TO THE LAKOTA AREA! CALL TODAY FOR INFORMATION! |